Industry information

Electric heating ring for plastic injection molding (stainless steel double clip electric heating ring, stainless steel nozzle electric heating ring, stainless steel single clip electric heating ring)

Release time: Author: website editor View: 1687

Uses and characteristics: Mainly used in the heating device of the plastic injection molding machine barrel. It has the characteristics of reasonable structure, beautiful appearance, stable performance, fast heating, uniform heat dissipation, good insulation performance, and high pressure resistance.

Technical parameters: 1. Leakage current and electric strength at working temperature. a) Leakage current <0.5mA b) Electric strength: 1250V1min without flashover and breakdown

2. Moisture resistant. Placed in a humid box with a temperature of 20∽30℃ and a relative humidity of 91%∽95% for 48 hours without any damage.

3. Lead out the tensile strength of the rod. Withstand 70% of the tensile force of the part, and there is no displacement or fracture for 3 minutes.

4. The deviation rate of power is less than ±5%.

5. Withstand high pressure>1500

High temperature electric heating ring for plastic injection molding machine and extruder (fully enclosed ceramic electric heating ring with nozzle, totally enclosed ceramic electric heating ring)

Uses and features: Mainly used in the barrel heating device of plastic injection molding machines and extruders. It has the characteristics of reasonable structure, beautiful appearance, stable performance, fast heating, uniform heat dissipation, good insulation performance, and high pressure resistance. Especially suitable for high temperature and high power requirements.

technical parameter :

1. Leakage current and electric strength at working temperature. a) Leakage current <0.5mA b) Electric strength: 1250V1min without flashover and breakdown

2. Moisture resistant. Placed in a humid box with a temperature of 20∽30℃ and a relative humidity of 91%∽95% for 48 hours without any damage.

3. Lead out the tensile strength of the rod. Withstand 70% of the tensile force of the part, and there is no displacement or fracture for 3 minutes.

4. The deviation rate of power is less than ±5%.

5. Withstand high pressure>1500